电话: +86 021 61063031
传真: +86 021 61063032
The calibration with relevant reference materials allows the use of multiple test devices across different locations. All test devices will provide comparable measurements within the given tolerance range.
In addition, the measurement principle is designed in such a way that the device is optimized for materials with glass fiber constituents.
This, along with a strong application orientated approach makes the device especially suitable for applications in the laser welding process of plastic materials.
" The light from a LED passes through a point shaped aperture with 1.5 mm diameter to the sample to be inspected. On the other side of the sample, the transmitted light is caught by the opening of a stainless steel tube with an inner diameter of <1.2 mm. "
An optical fiber in the tube receives the light at a solid angle of about 60° and guides it to a photodiode. The photodiode current is proportional to the amount of transmitted light.
This measurement method is in particular best suited for materials with glass fiber constituents.
The configuration and measurement software manages all relevant device settings as well as up to 10 measurement programs (recipes).
Four different operating modes are available as well as the monitoring of Min. / Max values and the data export in CSV format.
The integrated user administration prevents unintentional parameter changes.